Posted by _mario.lat on 12/16/06 17:39

Hallo,
I find a library very userfull form connect by telnet.
Just a question:

The library sends strange data: why? what is userfull for these data?
I mean these:


[...]
$this->conn1=chr(0xFF).chr(0xFB).chr(0x1F).chr(0xFF).chr(0xFB).
chr(0x20).chr(0xFF).chr(0xFB).chr(0x18).chr(0xFF).chr(0xFB).
chr(0x27).chr(0xFF).chr(0xFD).chr(0x01).chr(0xFF).chr(0xFB).
chr(0x03).chr(0xFF).chr(0xFD).chr(0x03).chr(0xFF).chr(0xFC).
chr(0x23).chr(0xFF).chr(0xFC).chr(0x24).chr(0xFF).chr(0xFA).
chr(0x1F).chr(0x00).chr(0x50).chr(0x00).chr(0x18).chr(0xFF).
chr(0xF0).chr(0xFF).chr(0xFA).chr(0x20).chr(0x00).chr(0x33).
chr(0x38).chr(0x34).chr(0x30).chr(0x30).chr(0x2C).chr(0x33).
chr(0x38).chr(0x34).chr(0x30).chr(0x30).chr(0xFF).chr(0xF0).
chr(0xFF).chr(0xFA).chr(0x27).chr(0x00).chr(0xFF).chr(0xF0).
chr(0xFF).chr(0xFA).chr(0x18).chr(0x00).chr(0x58).chr(0x54).
chr(0x45).chr(0x52).chr(0x4D).chr(0xFF).chr(0xF0);
$this->conn2=chr(0xFF).chr(0xFC).chr(0x01).chr(0xFF).chr(0xFC).
chr(0x22).chr(0xFF).chr(0xFE).chr(0x05).chr(0xFF).chr(0xFC).chr(0x21);

[...]
$this->fp=fsockopen($ip,23)
fputs($this->fp,$this->conn1);
fputs($this->fp,$this->conn2);
[...]


why to send $this->conn1 and $this->fp?
What is userfull for?

Thank you in advance for the time you'l spend for me!
Mario.

• Next in forum: Re: 'include' question
• Prev in forum: Re: 'include' question
• Thread view: telent: strange char at start connection. Please help me!

[Reply to this message]