|
|
Posted by Vizion on 10/21/52 11:26
On Sunday 11 September 2005 16:46, the author Dan Harrington contributed to
the dialogue on-
[PHP] Payflow Pro compile error:
>Greetings,
>
>It seems that I've gone around and around on this issue starting with PHP3
>every time I install a new server.
>
>And here I am again.
>
>OS:
>Linux 2.4.21-27.ELsmp #1 SMP Wed Dec 1 21:59:02 EST 2004 i686 i686 i386
>GNU/Linux
>php-5.0.4
>library with pfpro listed in /etc/ld.so.conf and I ran ldconfig...
>
>----------------------------------------------
>And when I type:
>
>./configure --with-mysql=/usr/local/mysql
>--with-apxs=/usr/local/apache/bin/apxs --with-curl --enable-mbstring=en
>--with-pfpro
>
>or
>
>./configure --with-mysql=/usr/local/mysql
>--with-apxs=/usr/local/apache/bin/apxs --with-curl --enable-mbstring=en
>--with-pfpro=/usr/local/src/verisign/payflowpro/linux/lib
>
>or
>
>./configure --with-mysql=/usr/local/mysql
>--with-apxs=/usr/local/apache/bin/apxs --with-curl --enable-mbstring=en
>--with-pfpro=/usr/local/lib
>
>or anything else I can think of, I get this error message:
>
>[.....]
>checking for Verisign Payflow Pro support... yes
>checking for pfproInit in -lpfpro... no
>checking for PNInit in -lpfpro... no
>configure: error: The pfpro extension requires version 2 or 3 of the SDK
>
>And I'm dead.
>
>Anyone have similar situation that knows what to do? Is it the Enterprise
>Linux v.3 Is it the PHP 5?
>
>(I have an Enterprise Linux 2 with PHP4 that works just fine!)
>
>Thanks
>Dan
This might be useful:
from
http://us2.php.net/pfpro
After weeks of searching and trying to install Payflow Pro on Red Hat
Enterprise Linux 3, I finally was able to make it work. Naturally I was very
hesitant to recompile my php configuration, but with a little help from
redhat, and about 3 hours, it was installed. I'll try to outline the steps as
best I can.
I'm running RedHat EL 3.0, php-4.3.2, apache 2.0.46.
Anyone running EL 3 is a member of the redhat network, so use up2date to
download the latest php source rpm.
up2date --get-source php (this will download the source rpm
into /var/spool/up2date)
rpm -i /var/spool/up2date/php-4.3.2 (or whatever version of php it gives you,
installing this source rpm will not affect your current php configuration)
cd /usr/src/redhat/SPECS
rpmbuild -bp php.spec (unpack the sources and apply patches)
I had a couple of dependency requirements (imap-devel, unixODBC-devel; yours
may vary; up2date 'whatever you need'; if you had to install dependant rpms,
run rpmbuild -bp php.spec again)
vi php.spec (edit the spec file and include the --with-pfpro)
on line 285 or 286, you'll see where the ./configure command is generated.
Adjust any defaults as necessary, I didn't need to, and add
--with-pfpro=[DIR]. Make sure to place this outside the if's, I placed mine
before ifarch(%ix86).
If you followed the instructions above, and unpacked pfpro into /usr/local,
you would add
--with-pfpro=--with-pfpro=/usr/local/verisign/payflowpro/sunsparc, where my
version was linuxrh9. I'm running modssl, my config was
--with-pfpro=shared,/usr/local.
Make sure that you have followed php.net's instructions and copied pfpro.h and
libpfpro.so to the appropriate directories.
Now that we've added our config line, build the rpm. You will get a compile
error if you have the incorrect version of the SDK. RedHat EL users should
have downloaded the SDK for RedHat 9.x.
rpmbuild -bb php.spec (this will take awhile)
**According to documentation on redhat, new versions of rpm added a feature
which causes a build termination if it finds files not "intended" to be
included in the package. Obviously, since we added pfpro, it wasn't intended
to be there. To get around this do the follow:
Edit your php.spec file (same one from earlier), and include
%define _unpackaged_files_terminate_build 0
I added this as the second line under the comments, mine looks like this:
%{!?oracle:%define oracle 0}
%define _unpackaged_files_terminate_build 0
This will allow the build to continue with these unpackaged files.
5 minutes later, if no errors were returned, it should that it build a whole
bunch of rpms, all related to php. Now lets install them.
Redhat recommeded uninstalling existing rpms and installing these new ones, as
opposed to using rpm -Uvh. So, uninstall the cooresponding php rpms. If it
complains about dependancies, use --nodeps. Now, install rpm -i your new
ones. You can install them all on the same line if you'd like.
rpm -i php-4.x.x. php-imap-4.x. php-mysql-4.x.x
Done! Now to quote Sean from below:
5) Copy /usr/src/redhat/BUILD/php-X.X.X/build-apache/modules/pfpro.so
to /usr/lib/php4.
6) Add "extension=pfpro.so" to /etc/php.d/pfpro.ini using the other .ini files
as templates.
Restart apache, and you should now be able to invoke the Payflow Pro
functions!
mark at tuscaloosadesigncompany dot com
25-Sep-2004 04:02
After upgrading my slackware system's glibc to 2.3.3 (which is the first
version of glibc on slackware that does not include a __ctype compatibility
patch) and spending far too much time trying to figure out why the configure
script could not figure out I had version 3 of the payflow pro library, the
simple solution was to download the "Linux (Redhat 9.x)" version of the
payflow SDK because Verisign has linked this version of the library to the
glibc 2.3.x version of the __ctype functions (which are of the form
__ctype_xxx_loc instead of __ctype_xxx).
You should avoid the "Linux - (libc6 / glibc2 / ELF kernels 2.0.36 and above)"
version of the SDK unless you have a glibc version < 2.3.x.
If you're having this problem, check your config.log for the following lines:
/usr/local/lib/libpfpro.so: undefined reference to `__ctype_b'
/usr/local/lib/libpfpro.so: undefined reference to `__ctype_tolower'
You can also run the following command to find out which version of the
__ctype functions the library was linked to:
readelf -s /usr/local/lib/libpfpro.so | grep ctype
sean at trunkmonkey dot com
17-Aug-2004 08:09
To expand on Michael's instructions on getting Payflow Pro working as a
loadable module under FreeBSD, you can do the same thing under RedHat
Enterprise and Fedora:
1) Drop pfpro.h and libpfpro.so into their respective directories per
Requirements above.
2) Install the RedHat Enterprise or Fedora PHP SRPM.
3) Add "--with-pfpro=shared,/usr/local \" to the "%configure \" line in
php.spec.
4) Run rpmbuild -bc php.spec
5) Copy /usr/src/redhat/BUILD/php-X.X.X/build-apache/modules/pfpro.so
to /usr/lib/php4.
6) Add "extension=pfpro.so" to /etc/php.d/pfpro.ini using the other .ini files
as templates.
/Sean/
--
40 yrs navigating and computing in blue waters.
English Owner & Captain of British Registered 60' bluewater Ketch S/V Taurus.
Currently in San Diego, CA. Sailing bound for Europe via Panama Canal after
completing engineroom refit.
Navigation:
[Reply to this message]
|